PSTN access via pbx

Unanswered Question
Dec 5th, 2008
User Badges:

Dear all

we have our access to pstn via Ericcson pbx(MD110)

our callers want hear pstn dial tone after pressing 9.

right now they can access pstn but without hearing pstn dail tone

please let me any hint or idea.

thank you

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Brandon Buffin Tue, 12/09/2008 - 12:06
User Badges:
  • Purple, 4500 points or more

Are you using Callmanager for call control? If so, you can check the "Provide outside dial tone" box on the route pattern(s) that point to the PBX for PSTN access.

Hope this helps.


Nicholas Matthews Fri, 12/12/2008 - 17:55
User Badges:
  • Red, 2250 points or more

3 choices:


secondary-dialtone STRING

Previously mentioned CUCM:

'Provide Outside Dialtone' on route pattern

On a gateway with a PRI:

dial-peer voice x pots

incoming called-number 9

That allows the user to hear dial tone from the router, and it will forward it from there.

This can also be done on the PBX, through their own means.


This Discussion