Solved: ASA 5520 boots to rommon #0> and doesn't fully load w/o typing boot

chrish · ‎12-05-2008

Hi, had to do a password recovery but must have typed something incorrect. Our ASA5520 now only boots to rommon #0> and we have to type "boot" to get it to fully load. Software version asa804-k8.bin.

Tried to go back to factory default, but still only boots to the rommon #0. Thanks, Chris.

Jon Marshall · ‎12-05-2008

Chris

Sounds like your config register has been set to the wrong value. To set it back to default

no config-register

save and then reload your ASA -

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2121156

Jon

View solution in original post

Jon Marshall · ‎12-05-2008

Chris

Sounds like your config register has been set to the wrong value. To set it back to default

no config-register

save and then reload your ASA -

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2121156

Jon

chrish · ‎12-05-2008

Hi Jon,

Easy enough thank you for solving my problem. :)