SRST support on Cisco 3845 router

Answered Question
Dec 5th, 2008

Hi All,

We have a cisco 3845 router and we are trying to figure out,what all hardware/software components required to configure SRST on this router. Any help would be appreciated.

Thanks

Regards

Anantha Subramanian Natarajan

I have this problem too.
0 votes
Correct Answer by Michael Owuor about 7 years 12 months ago

Anantha,

Depending on what you want to do, determine the number of DSP's you need. You could use the DSP Calculator for this:

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

Here's information on the DSP modules:

http://www.cisco.com/en/US/prod/collateral/modules/ps3115/ps6024/prod_qas0900aecd8016c6ad_ps5855_Products_Q_and_A_Item.html

Hope this helps.

Thanks,

Michael.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
anasubra_2 Fri, 12/05/2008 - 12:26

Hi Michael,

Thank you very much. I would assume the cisco 3845 router requires a PVDM2 and if so,do you have a comparison chart for it ?

Once again thanks

Regards

Anantha Subramanian Natarajan

Correct Answer
Michael Owuor Fri, 12/05/2008 - 12:42

Anantha,

Depending on what you want to do, determine the number of DSP's you need. You could use the DSP Calculator for this:

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

Here's information on the DSP modules:

http://www.cisco.com/en/US/prod/collateral/modules/ps3115/ps6024/prod_qas0900aecd8016c6ad_ps5855_Products_Q_and_A_Item.html

Hope this helps.

Thanks,

Michael.

anasubra_2 Fri, 12/05/2008 - 12:45

Hi Michael,

Thank you very much and have a nice day

Regards

Anantha Subramanian Natarajan

Actions

This Discussion