AIRONET 1242AG from wep to WPA2-PSK

Unanswered Question
Dec 5th, 2008

Hi, I have several AP, each one of them on a each department of my building.

Each AP is connected to a switch, AP's are using WEP but I want to migrate to WPA2-PSK

I have gone through the following link

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43auth.html#wp1048777

But it's not pretty clear to me.

My questions are:

1-Should I make some changes also on the switches where the AP are connnected to, or should I just swap from WEP to WPA2-PSK?

2- Does anyone has a step by step configuration for WPA2-PSK?

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
gamccall Fri, 12/05/2008 - 21:05

1) nothing changes upstream from the AP.

2)

dot11 ssid Your_SSID

authentication open

authentication key-management wpa

guest-mode

wpa-psk ascii 0 Your_WPA_Key

interface Dot11Radio0

encryption mode ciphers aes-ccm

ssid Your_SSID

Obviously, delete any wep keys from d0 config.

Actions

This Discussion