ASA 5505 - Can it be configured for Outbound Load Balancing

Unanswered Question
Dec 8th, 2008

Can you configure the ASA 5505 for Load Balancing Outbound traffic. I have 2 T1 connections and would like the 5505 to distribute outbound traffic between the 2 connections.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Collin Clark Mon, 12/08/2008 - 13:07

You should have your router that is terminating the T1's do the load balancing. You can configure GLBP to load balance on the ethernet side.

Hope that helps.

ben.gordon Fri, 12/26/2008 - 05:41

If you have a router on each t1, you can use ospf to load balance on the way out. Now, load balancing on the way in..... I believe that is taken care of by your ISP.

Pravin Phadte Thu, 01/08/2009 - 03:11

Hi,

Yes you need a router.

You can create MLPPP on the router with one of the ethenet port connected to the cisco asa as outside interface.

Actions

This Discussion