12-08-2008 02:10 PM - edited 03-06-2019 02:52 AM
Good day gentlemn
I have a 350 with a minimal config on it. I am trying to ping from my 3 VLAN to my 252 VLAN on this switch and it will not allow it. I am sure I am doing something wrong, But I cannot figure it our or even if I can do so.
Here is the config I have, if anyone can help I would be mighty grateful
PHXEMTCSQA003#sh run
Building configuration...
Current configuration : 3384 bytes
!
version 12.2
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname PHXEMTCSQA003
!
logging buffered 8192 debugging
enable secret 5 $1$6XPe$fx1DT5Y4A51GuzUkzHuZN0
!
username local secret 5 $1$gKrb$3ZFzFUZqWdfftVm/mq1PO0
no aaa new-model
clock timezone EST -5
ip subnet-zero
!
!
!
!
!
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
interface FastEthernet0/1
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/2
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/3
switchport access vlan 3
switchport mode access
no snmp trap link-status
!
interface FastEthernet0/4
switchport access vlan 3
no snmp trap link-status
!
interface FastEthernet0/5
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/6
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/7
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/8
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/9
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/10
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/11
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/12
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/13
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/14
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/15
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/16
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/17
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/18
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/19
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/20
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/21
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/22
switchport access vlan 3
switchport mode access
!
interface FastEthernet0/23
description **TSC_QA_UPLINKS TO 7206**
switchport access vlan 252
switchport mode access
!
interface FastEthernet0/24
description **TSC_QA_UPLINKS TO 7206**
switchport access vlan 252
switchport mode access
!
interface GigabitEthernet0/1
shutdown
!
interface GigabitEthernet0/2
shutdown
!
interface Vlan1
no ip address
no ip route-cache
!
interface Vlan3
description **TSC_QA_GATEWAY**
ip address 172.16.3.1 255.255.255.0
!
interface Vlan251
no ip address
no ip redirects
no ip proxy-arp
no ip route-cache
shutdown
!
interface Vlan252
description **TCS_QA_Uplink**
ip address 172.16.252.1 255.255.255.0
!
no ip classless
no ip http server
no ip http secure-server
!
!
12-08-2008 02:16 PM
Have you configured ip routing ie.
3560(config)# ip routing
Jon
12-08-2008 02:47 PM
I have now, Also, I did not have anything connected to VLAN 252, once I did I could ping it. I haven't installed it properly yet to see if I can route traffic to it. As soon as I do I will probably be back..
Thanks Jon
12-08-2008 03:59 PM
Scott
No problem, glad you got it working.
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: