12-08-2008 06:27 PM
Can the TFTP server installed by CiscoWorks be accessed outside of the application. When I try to send a config to the CiscoWorks server manually from a switch, I get a message:
%Error opening tftp://wdcma215/rtpwdc-bir-sx01-confg (Permission denied)
Can it be enabled to be accessed? Read-only would be OK. Thanks.
Solved! Go to Solution.
12-08-2008 10:48 PM
Yes, the TFTP server can be used outside of LMS. However, like many TFTP implementations, you need to create any file you want to write BEFORE copying it from the device. So, to TFTP a file called rtpwdc-bir-sx01-confg from a switch to the LMS server, you would need to create an empty rtpwdc-bir-sx01-confg in the tftpboot directory first. Then you will be able to write it from the switch to the server.
12-08-2008 10:48 PM
Yes, the TFTP server can be used outside of LMS. However, like many TFTP implementations, you need to create any file you want to write BEFORE copying it from the device. So, to TFTP a file called rtpwdc-bir-sx01-confg from a switch to the LMS server, you would need to create an empty rtpwdc-bir-sx01-confg in the tftpboot directory first. Then you will be able to write it from the switch to the server.
12-09-2008 10:11 AM
Thanks, that did the trick.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide