NM-8CE1T1-PRI configuration

Unanswered Question
Dec 8th, 2008

Hi,

I know that NM-8CE1T1-PRI card can support only 128 channels. Could any one confirm whether it supports clear channel configuration.

If I configure 4 ports as channelised E1 making use of 128 channels, can I configure remaining 4 ports as clear channel supporting 2 Mbps. ?

Please provide the configuration for clear channel.

Please provide a documenation for NM-8CE1T1-PRI configuration.

Thanks,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
drolemc Fri, 12/12/2008 - 13:44

Cisco 8-Port Channelized T1/E1 and ISDN PRI High Speed WAN Network Module

- Part number: NM-8CE1T1-PRI

- Provides channelized T1 or E1 connections or ISDN PRI connections

- Supported on Cisco 3800 series routers

-- Remote Management over

This channelized network module provides T1/E1 and ISDN support. It has 128 channels.

The T1/E1 HWICs or network module will not be operational until a card type is configured.

1. enable

2. configure terminal

3. card type {t1 | e1} slot subslot

For further information click this link.

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4_11xw/fmt1e1ic.html#wp1054923

Actions

This Discussion