12-09-2008 01:03 AM - edited 03-13-2019 05:54 PM
Hi All,
Is there any way to find out the serial number of MCS-7825-I1 on which CCM version 4.X is running? instead of seeing the serial number sticker which is on TOP of box.
regds,
aman
12-09-2008 01:21 AM
it could be the case that some hp management app is installed, sort of diagnostics, I believe you can see the serial from there
12-09-2008 03:40 AM
Hi ,
Is there any way to edit the registry editor and find out serial number of box?
regds,
aman
12-09-2008 05:36 AM
Hi Aman,
Just to add a touch to the good tips from Steve;
From Jamie;
"There is a service on the HP servers called "HP System Management Homepage". You need to start this and the browser mgmt interface will become available.
Look under the System Config -> System Board link and you will see the server's serial number."
There are some good ideas for 4.x servers in this thread;
Hope this helps!
Rob
12-09-2008 06:51 AM
HP has a vbs script that reads the serial number from BIOS - It works on IBM servers too:
http://h41111.www4.hp.com/hps/carepack/emea_middle_east/en/getserial.html
If web access from the server is restricted, you could RDP/VNC to server:
Open a Notepad, paste in the following text and save file as sn.vbs (select save as type all files, not txt).
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colBIOS = objWMIService.ExecQuery _
("Select * from Win32_BIOS")
For each objBIOS in colBIOS
Wscript.Echo "Manufacturer: " & objBIOS.Manufacturer
Wscript.Echo "Serial Number: " & objBIOS.SerialNumber
Next
Double click on sn.vbs and it will show the manufacturer (IBM/HP etc ) and the serial number
12-11-2008 05:24 PM
Hi ,
We have got the local access to MCS and is in production.One way was to restart the system & go to System SETUP by pressing F9 but I am not getting any downtime.Moreover,customer has only one CCM i.e. PUB ,no Subscriber.
the second option as suggested by you.But is there any way to avoid installing VNC and copying these lines & running them.
regds,
aman
12-10-2008 12:04 PM
You can also look into the SCSI Array Diagnostic program on the server and when you run it and it gives you the report, the serial number is included at the top of the report.
12-12-2008 05:40 AM
Hi Julio,
Please can u give me the detail of how to do this?
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide