I am unable to telnet to our ASA
the config is as follows
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 5
console timeout 0
threat-detection statistics access-list
I am logged into the switch that this is connected to
Yes. You can do something like the below configuration which excludes those addresses.
ip local pool A-Pool 172.30.0.10-172.30.0.254 mask 255.255.255.255
For testing purposes, try changing the pool to the above address range and let me know if it works. If it works, we know the pool was causing the issue, if not we can troubleshoot this further.
*Pls rate if it helps*