×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RightFax - receive failure (phase B)

Unanswered Question
Dec 10th, 2008
User Badges:

Hi all,

We have a RightFax server configured and I can send the fax now. (using SR140, h323 GW configured point to voice gateway), but in the Fax Util, the fax is displayed as Sending Error and the history shows this message: "Resulting status code (0/339; 4/54): Receive failure (Phase B)"

Pls explain this and show me how to configure the server and the GW.

Thanks,

hoanghiep

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jason Aarons Thu, 04/26/2012 - 11:38
User Badges:
  • Bronze, 100 points or more

I'd like to know his IOS version, etc.


fax-relay sg3-to-g3 is the default for 12.4.24T/3845 as my customer.  However I'm seeing this in the rightfax 9.4 1.40.70 logs as well.

Nicholas Matthews Fri, 01/16/2009 - 07:56
User Badges:
  • Red, 2250 points or more

On your cisco IOS gateways, try configuring this command:


voice service voip

fax-relay sg3-to-g3




At this time, fax relay does not support Super-G3 fax speeds.



hth,

nick

Jason Aarons Thu, 04/19/2012 - 16:19
User Badges:
  • Bronze, 100 points or more

Did Nick's suggestion for sg3-to-g3 fix the problem? Have a similar issue where RightFax fails with PhaseB message.

Actions

This Discussion