12-10-2008 07:18 AM - edited 03-11-2019 07:24 AM
Hello, we seem to have experienced a problem when upgrading some of our Cisco terminal severs (3845s) to c3845-ipbasek9-mz.124-21.bin.
Certain Terminal lines would say they were in use when trying to connect.
Any ideas?
12-16-2008 04:13 PM
Make sure that the async lines use the minimum configuration of the transport input telnet command. So you can Telnet to the devices on the async line.
For the further description following URL may help you for the configuration
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml
12-17-2008 02:52 AM
Hello,
The config is fine. Here is some more info:
Requested line is busy
If I do a show line or show user for the particular line that reports the message it shows it's not in use, the only other message that we see in the logs after a reload was the following.
%SYS-3-HARIKARI: Process SSH Process top-level routine exited
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: