cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
933
Views
0
Helpful
6
Replies

"Primary Discovery Reply: message decoding failed"

timothybward
Level 1
Level 1

I'm getting the above message in the logs from some of my AP's, I can't seem to find any information on it-- any ideas?

Thanks!

Tim

6 Replies 6

Scott Fella
Hall of Fame
Hall of Fame

Where are you seeing this error on? Post more of the log and let us know what equipment and code you are running.

-Scott
*** Please rate helpful posts ***

Hi,

Thanks for the reply. I am seeing this is logs from the AP's themselves.

The software version information follows:

Software Version 4.2.112.0

Thanks!

So you consoled into each ap and you see this error? Can you post more of the log.... like to see what is happening prior to the error.

-Scott
*** Please rate helpful posts ***

Hi,

No I've got them logging to a central syslog server.

Dec 10 14:10:43 10.7.15.3 25741: AP:001d.a1cd.23b6: %LWAPP-3-CLIENTERRORLOG: Primary Discovery Reply: message decoding failed

Dec 10 14:11:13 10.7.15.3 25742: AP:001d.a1cd.23b6: %LWAPP-3-CLIENTERRORLOG: spamDecodePrimaryDiscoveryRes: Len 12593 of BOARD_DATA_PAYLOAD is not 46

Dec 10 14:11:13 10.7.15.3 25743: AP:001d.a1cd.23b6:

Dec 10 14:11:13 10.7.15.3 25744: AP:001d.a1cd.23b6: %LWAPP-3-CLIENTERRORLOG: Primary Discovery Reply: message decoding failed

Dec 10 14:11:43 10.7.15.3 25745: AP:001d.a1cd.23b6: %LWAPP-3-CLIENTERRORLOG: spamDecodePrimaryDiscoveryRes: Len 12593 of BOARD_DATA_PAYLOAD is not 46

Dec 10 14:11:43 10.7.15.3 25746: AP:001d.a1cd.23b6:

Dec 10 14:11:43 10.7.15.3 25747: AP:001d.a1cd.23b6: %LWAPP-3-CLIENTERRORLOG: Primary Discovery Reply: message decoding failed

Over and over.

Well this is what I found, also is it just one AP? Lookming at what you posted, it only shows one ap mac address. Review your configuration and verify your join process and mobility.

Error Message LWAPP-3-CLIENTERRORLOG: "s"

Explanation This log message indicates an LWAPP client error event. The message is logged to help in troubleshooting LWAPP access point join problems.

Recommended Action No action is required.

http://www.ciscosystems.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-appC-errormsg.html#wp1045904

-Scott
*** Please rate helpful posts ***

Hi, No it's on numerous AP's. When you say verify the join process, what do you mean? I've verified that the mobility group is up and working.

Thanks,

Tim

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: