dail-peer not working

Answered Question
Dec 10th, 2008

Dial peer 14 is not working:

http://pastebin.ca/1281736

debug voice dialpeer inout:

Dec 10 16:30:47.846: //-1/BC172FC2B698/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=103

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:

Calling Number=, Called Number=2142346837, Peer Info Type=DIALPEER_INFO_SPEECH

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=2142346837

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:

No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersMoreArg:

Result=NO_MATCH(-1)

I have this problem too.
0 votes
Correct Answer by allan.thomas about 8 years 1 day ago

Hi Shaun, when you show dial-peer voice summary, what is the status of the dial-peer 114? Up or Down?

What I have noticed is that the trunk group label that you have assigned does not have any active voice-ports. Therefore I suspect that it is down.

Should the trunkgroup label be 'trunkgroup Local' and NOT 'trunkgroup local'?

Hope this helps

Allan.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
allan.thomas Wed, 12/10/2008 - 09:11

Hi Shaun, when you show dial-peer voice summary, what is the status of the dial-peer 114? Up or Down?

What I have noticed is that the trunk group label that you have assigned does not have any active voice-ports. Therefore I suspect that it is down.

Should the trunkgroup label be 'trunkgroup Local' and NOT 'trunkgroup local'?

Hope this helps

Allan.

sdaniels44 Wed, 12/10/2008 - 09:19

Im an idiot, thanks for your help.

local should have been Local. It is case sensitive.

You were right.

Actions

This Discussion