12-10-2008 08:11 AM - edited 03-15-2019 03:00 PM
Dial peer 14 is not working:
debug voice dialpeer inout:
Dec 10 16:30:47.846: //-1/BC172FC2B698/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=103
Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:
Calling Number=, Called Number=2142346837, Peer Info Type=DIALPEER_INFO_SPEECH
Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=2142346837
Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersMoreArg:
Result=NO_MATCH(-1)
Solved! Go to Solution.
12-10-2008 09:11 AM
Hi Shaun, when you show dial-peer voice summary, what is the status of the dial-peer 114? Up or Down?
What I have noticed is that the trunk group label that you have assigned does not have any active voice-ports. Therefore I suspect that it is down.
Should the trunkgroup label be 'trunkgroup Local' and NOT 'trunkgroup local'?
Hope this helps
Allan.
12-10-2008 09:11 AM
Hi Shaun, when you show dial-peer voice summary, what is the status of the dial-peer 114? Up or Down?
What I have noticed is that the trunk group label that you have assigned does not have any active voice-ports. Therefore I suspect that it is down.
Should the trunkgroup label be 'trunkgroup Local' and NOT 'trunkgroup local'?
Hope this helps
Allan.
12-10-2008 09:19 AM
Im an idiot, thanks for your help.
local should have been Local. It is case sensitive.
You were right.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: