RRM DCA algorithm and DCA sensitivity

Unanswered Question
Dec 10th, 2008

Can anyone explain in detail the way DCA works? I have read the RRM document - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#dca_algorithm

many times and I still do not understand DCA fully. It would help to have examples as well as to know when DCA sensitivity setting of high would be recommended.



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
didyap Tue, 12/16/2008 - 09:21

DCA Sensitivity Level The configured DCA sensitivity setting: low, medium, or high. This setting determines how sensitive the DCA algorithm is to environmental changes such as signal, load, noise, and interference when determining whether to change channels.You can use the config advanced {802.11a | 802.11b} channel dca sensitivity {low | medium | high} CLI command to configure the DCA sensitivity level.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode