7921/25 Push To Talk

Unanswered Question
Rob Huffman Wed, 12/10/2008 - 09:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Joseph,


As far as I know this is still the only way :(


This is not a built-in service (at least yet). Have a look at the following;


Q. Is Push-to-talk (PTT) natively supported on Cisco Unified CallManager or does it require a third-party application and server?


A. PTT is not supported natively on Cisco Unified CallManager. To support PTT, the Cisco Unified Wireless IP Phone 7921G relies on support via an XML application.


Q. How is PTT different on the Cisco Unified Wireless IP Phone 7921G compared to the Cisco Unified Wireless IP Phone 7920?


A. The Cisco Unified Wireless IP Phone 7921G has a dedicated application button that supports PTT via XML; the Cisco Unified Wireless IP Phone 7920 uses soft keys for PTT.


Q. Does the Cisco Unified Wireless IP Phone 7921G support XML?


A. Yes. In fact, several third-party vendors are building XML applications that work with the Cisco Unified Wireless IP Phone 7921G.


From this doc;


http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item0900aecd80601788.shtml


Check out Berbee (Push to Talk)


http://www.cisco.com/comm/applications/IPCApps/Docs/berbeecollateral.pdf


Hope this helps!

Rob


Jonathan Schulenberg Wed, 12/10/2008 - 11:37
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

I believe CDW and LiteScape also make push-to-talk applications.


Cisco at one point or another was going to OEM the LiteScape product into CUAE but I'm not sure if that ever happened.

Actions

This Discussion