QoS 3750ME

Unanswered Question
Dec 11th, 2008

Can not configure Qos for SVI interface.

Configuration:

Class Map match-any class-default (id 0)

Match any

Class Map match-any cl-voice (id 1)

Match access-group 110

Class Map match-all cl-input (id 2)

Match input-interface GigabitEthernet1/0/1

---

Extended IP access list 110

10 permit ip 192.168.23.0 0.0.0.255 any

20 permit ip 192.168.36.0 0.0.0.255 any

30 permit ip 192.168.34.0 0.0.0.255 any

---------

Policy Map POL-VOICE

Class cl-input

police 10000000 100000 exceed-action drop

Policy Map POL-PARENT

Class cl-voice

set dscp 31

service-policy POL-VOICE

----

interface Vlan120

ip address 172.16.19.2 255.255.255.0

service-policy input POL-PARENT

Networks in the access list are Ip phone networks. Need to offer a rate limit to those networks.

When executing sh policy-map interface vlan 120:

Vlan120

Service-policy input: POL-PARENT

Class-map: cl-voice (match-any)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: access-group 110

Service-policy : POL-VOICE

Class-map: cl-input (match-all)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: input-interface GigabitEthernet1/0/1

Class-map: class-default (match-any)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: any

Class-map: class-default (match-any)

226 packets, 15016 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: any

Interface gigabit 1/0/1 is an ingress port from those networks in this case

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion