L2 and L3 connectivity

Unanswered Question
Dec 11th, 2008
User Badges:

Hi ALL:


I have a 2 L3 switch which are connected to l2 Switch the L2 switch is again

connected to one more L2 and then to router.

I want to added a static route on both the L3 ,for which the next hop is router.

What configuration do i have to do on L3 and L2 switch for this to work.


L3---->L2---->L2----->Router

|

|

L3


L3 ARE CONNECTED TO EACH OTHER AS WELL AS TO L2.


Chao

Vishwa


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Thu, 12/11/2008 - 04:01
User Badges:
  • Green, 3000 points or more

Are they all in the same subnet or the two L3's are seperated by a seperate L3 link?


Narayan

vishwancc Thu, 12/11/2008 - 05:07
User Badges:

Hi Narayan,


I am looking for a solution to pass my vlan x traffic to the router and all other traffic the the way it was going ,right now there is a default route pointing to the firewall on L3 for all the traffic the firewall is in between the L2 and for this solution i want to bypass the firewall as well so i have not inclued it in the diagram.


Chao

Vishwa

Davy Ad Fri, 12/12/2008 - 01:48
User Badges:

Hi Vishwa ,

"IP helper" could be the best way for you or configure Static route to each device.


HTH

DAk

Actions

This Discussion