Solved: Cisco 2100 Wireless Controller and Cisco IOS DHCP setup? - Cisco Community

776

Views

0

Helpful

2

Replies

Hello everyone. I have a Cisco 2125 Wireless Controller with Cisco 1131AG Lightweight Access Points.

Simple question about about DHCP options.

We are using our Cisco 2801 router for DHCP services, how would I configure the DHCP options (assuming the WLC IP is 192.168.1.9)?

Can someone provide a sample Cisco IOS DHCP configuration for the LWAPPs to communicate with the Controller, etc?

Thank you!

1 Accepted Solution

Accepted Solutions

Here is a link that can walk you through it.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml#t2

ip dhcp pool

network

default-router

dns-server

option 60 ascii "Cisco AP c1130"

option 43 hex f104c0a80109

-Scott
*** Please rate helpful posts ***

View solution in original post

2 Replies 2

Here is a link that can walk you through it.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml#t2

ip dhcp pool

network

default-router

dns-server

option 60 ascii "Cisco AP c1130"

option 43 hex f104c0a80109

-Scott
*** Please rate helpful posts ***

Thank you very much!

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community

Review Cisco Networking products for a $25 gift card