IOS Firewall/NAT and H.323 Video

Unanswered Question

Hi, attemping to configure an IOS Firewall (12.4) code to allow inbound video calls, but it's not working... Outbound calls are OK. There is H.323 "ip inspect" commands in there for the IOS firewall and a one-to-one static NAT. I have temporarily opened the ACL to permit all TCP/UDP traffic to the public IP and still no go, any ideas? Thanks!!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
veltkamp84 Mon, 10/24/2016 - 05:25
User Badges:

Hi all,

I know this is kinda of an old topic but unforunatly no answer yet.
I'm having the same issue at this moment.. anyone any ideas to point me in the right direction?

Kind Regards,


This Discussion