12-14-2008 02:26 AM - edited 03-04-2019 12:42 AM
Dear all,
Can Cisco Router support multiple PPPoE connection?
If yes, can it also support load-sharing for outgoing support to different PPPoE connection?
Thanks,
Eric
12-14-2008 03:07 AM
I think you can , but i didn't use it
You can try from SDM create another Dialer and try binding to one other physical interface .
For load balancing you can refer the below doc.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml
Regards
Haris
12-14-2008 04:20 AM
Hello Eric,
in 12.4T support for multiple PPPoE clients over the same ATM/ADSL interface has been introduced
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t15/mpppoec.html
if instead you want to use multiple DSL lines you can follow the suggestions of the previous post: you define a dialer interface for each DSL interface.
The more difficult part can be NAT configuration.
Routing redundancy is as simple as adding a second defaul static route
Hope to help
Giuseppe
12-14-2008 07:31 AM
Thanks for your prompt reply. It is very helpful.
Besides, do you know if Cisco ASA also have such features?
Thanks,
Eric
12-15-2008 11:35 AM
Hello Eric,
I don't think ASA supports the PPPoE client feature, it can support multiple default routes out the same interface
see
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ip.html
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide