12-14-2008 08:37 PM - edited 03-18-2019 10:09 PM
hi,
we had a cisco 3845 (120406T) router in our central location and 2821 in our remote location
we are planing to install the cucm7.0 BE in our 3845 series router .
Any special hardware is required ?.
12-15-2008 07:16 AM
Umm, I assume you are referring to UCM Express? Sure, just load the appropriate IOS version.
CUCM-BE requires a MCS7828 server. It can use the 3845 as a gateway and CUBE but it must run on dedicated hardware.
12-15-2008 08:20 PM
hi j.schulenberg,
we have 1 central location and 12 remote location we need a data and voice(voip) connectivity between cntral to remote locations.
One Base station - at central site and
12 Remote stations - at Remote locations
We would like to have complete VoIP solution between the Users of Central location and Remote locations .
The transportation of Data from Base to Remote locations and vice-versa will be through Radio which gives the User data rate of 256 Kbps.per Remote
The no. of Users or VoIP connections at each site will be as follows
At Base Station : 10 Nos
At Remote 1 : 5 Nos
At Remote 2 : 5 Nos
At remaining 10 Remotes : 4 Nos at each remote
Please suggest us with the suitable model for the above configuration supporting features like call conferencing among the users
i.e., between Base and Remote stations.
- between users of Remote stations.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide