cucm 7.0 BE

punithsree · ‎12-14-2008

hi,

we had a cisco 3845 (120406T) router in our central location and 2821 in our remote location

we are planing to install the cucm7.0 BE in our 3845 series router .

Any special hardware is required ?.

Jonathan Schulenberg · ‎12-15-2008

Umm, I assume you are referring to UCM Express? Sure, just load the appropriate IOS version.

CUCM-BE requires a MCS7828 server. It can use the 3845 as a gateway and CUBE but it must run on dedicated hardware.

punithsree · ‎12-15-2008

hi j.schulenberg,

we have 1 central location and 12 remote location we need a data and voice(voip) connectivity between cntral to remote locations.

One Base station - at central site and

12 Remote stations - at Remote locations

We would like to have complete VoIP solution between the Users of Central location and Remote locations .

The transportation of Data from Base to Remote locations and vice-versa will be through Radio which gives the User data rate of 256 Kbps.per Remote

The no. of Users or VoIP connections at each site will be as follows

At Base Station : 10 Nos

At Remote 1 : 5 Nos

At Remote 2 : 5 Nos

At remaining 10 Remotes : 4 Nos at each remote

Please suggest us with the suitable model for the above configuration supporting features like call conferencing among the users

i.e., between Base and Remote stations.

- between users of Remote stations.