Power supply for Cisco WS-C2924-XL-EN

jrjmkey007 · ‎12-14-2008

I am currently looking at purchasing a number of the above mentioned units to take with me to SE Asia where I run a number of Internet cafes and finding Cisco products refurbished/used is very hard to do. I have read the specs and it looks to me like the PS unit will work fine on the SE Asia voltage but of course I would like to have this confirmed before I plug them in and have them blow up on me.

Any direction anyone can offer on this subject would be greatly appreciated. Thanks in advance.

irisrios · ‎12-22-2008

Technical Specifications (Catalyst 2900 Series XL):

http://www.cisco.com/en/US/products/hw/switches/ps605/products_installation_guide_chapter09186a008007eac9.html

jrjmkey007 · ‎12-22-2008

Hi, I did read all that previously and hence my belief that it will be ok, I was more looking for someone to actually say yeah they've done it with no issues, or no don't do it.. in reading through all those specs as I said it "should" be fine, but what should be and what is are not always the same thing. Thanks for the reply.

Leo Laohoo · ‎02-03-2009

The switch model is auto-voltage: 110/220 volts OK.