ACS Shell Command Authorizations Set

Unanswered Question
Dec 15th, 2008
User Badges:

I have Cisco ACS Server V4.0

In the shell Command Authorization Set I configure a restrict Access.

In the privilege mode the restriction of the commands works good, but when I enter in the config prompt the restriction don't works. In this promt I can enter all commands.

Why This?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Collin Clark Mon, 12/15/2008 - 06:14
User Badges:
  • Purple, 4500 points or more

It's probably misconfigured somewhere.

wilnil123 Mon, 12/29/2008 - 11:36
User Badges:

I have the same error with ACS Server 4.2. I can restrict in privilege mode but global config is wide open. Also any command i block in privilege mode can still be executed in global config using the "do" command. How do i block that, or find out what commands the router is sending to the ACS.

Jagdeep Gambhir Mon, 12/29/2008 - 12:23
User Badges:
  • Red, 2250 points or more

Hi All,

Please paste the aaa commands and also make sure you have this command

" aaa authorization config-commands"




This Discussion