12-15-2008 05:37 AM - edited 03-10-2019 04:14 PM
I have Cisco ACS Server V4.0
In the shell Command Authorization Set I configure a restrict Access.
In the privilege mode the restriction of the commands works good, but when I enter in the config prompt the restriction don't works. In this promt I can enter all commands.
Why This?
12-15-2008 06:14 AM
It's probably misconfigured somewhere.
12-29-2008 11:36 AM
I have the same error with ACS Server 4.2. I can restrict in privilege mode but global config is wide open. Also any command i block in privilege mode can still be executed in global config using the "do" command. How do i block that, or find out what commands the router is sending to the ACS.
12-29-2008 12:23 PM
Hi All,
Please paste the aaa commands and also make sure you have this command
" aaa authorization config-commands"
Regards,
~JG
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide