cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
52801
Views
11
Helpful
15
Replies

Windows CDP client

kutukutu9
Level 1
Level 1

Any one here know of a good Windows CDP client they have used?

Thanks

15 Replies 15

John Blakley
VIP Alumni
VIP Alumni

What are you needing this for? CDP is for Cisco devices to be aware of what other Cisco devices are connected to it, and it reports device type, port it's connected to, etc.

More information would be helpful on what you're needing to do.

HTH,

John

HTH, John *** Please rate all useful posts ***

Well you can't always determine what switch port a PC is plugged in to. If I could install a CDP client on the windows machine I'd have no issues knowing what switch they are plugged in to.

I know you can take the IP address of the PC and hunt down the MAC in your core with a "show ip arp | i "ip" - then get the port with "show mac-address-table | i "mac" identified by the show ip arp. BUT this doesn't always work and can be time consuming depending on the network.

Yeah, I have to agree on the time consuming part. I'm not sure anyone has a CDP client, but the thought of how you want to use it would be cool. I'd be interested if anyone has used anything like this, but I've never seen anything like it.

John

HTH, John *** Please rate all useful posts ***

.

when all else fails, trace the cables...

cdp ttl=2 ... 1 hop ... means you still have to go each switch...

glen.grant
VIP Alumni
VIP Alumni

There appears to be a number of them just google windows cdp client .

ohassairi
Level 5
Level 5

here is one software that i use

All you have to so is ping the PC, the check the arp table for the mac address, then search the CAM table for the mac address and the switchport it's connected to - easy.

Andrew

If you have a very large network with many switches this is to cumbersome and at times does not work.

Only if:-

1) You have no IP subnet structure

2) You have not created an

Access <> Distirbution <> Core - switching topology

And it will always work if:-

1) The IP addres of the device is correct

2) The device is powered on

3) the device is connected to the network

4) it's been on-line for some time

5) You are looking for the device in the same logical broadcast domain (VLAN)

I find that I can find any IP address in my network (over 15 countries, over 500+ network devices, with over 5000+ users, 1000+ servers, and god only knows how may printers/IP photocopiers etc) from just receving the IP address, in about 2 minutes.

If your network is well planned and structured.

JMTPW

Andrew

We do indeed have Access <> Distribution <> Core - switching topology and of course an ip subnet structure.

Always is a very strong statement. It doesn't always work for me. In one area particularly it hardly ever works. I have six 3750 switches stacked and the arp table seldom has the info I need for devices within that stack.

Below is the arp table for a site that currently has over 300 users all with the PC turned on right now...

3750-stack#show ip arp

Protocol Address Age (min) Hardware Addr Type Interface

Internet 10.86.10.20 - 0024.a913.a240 ARPA Vlan1

Internet 10.86.10.2 137 0029.51a3.2cc0 ARPA Vlan1

Internet 10.86.10.1 0 002c.f190.c208 ARPA Vlan1

Internet 10.86.7.2 - 0024.a1c3.a327 ARPA Vlan7

Internet 127.0.20.20 - 0000.0000.0000 ARPA Virtual1

ohassairi

What is the name of this client? Who developed it?

There are many on "google" but I don't trust the source.

Thanks

Kurt

i found it in

http://www.tallsoft.com/cdpclient_setup.zip

i tried it successfully and i hope it does not contain any trojan :-)

so pls vote if this solves your pb

digitec786
Level 1
Level 1

https://sourceforge.net/projects/cdp4win/?source=typ_redirect

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco