Lan to Lan tunnel between Juniper SSG5 and Cisco 3005 concentrator

Unanswered Question
Dec 15th, 2008
User Badges:

Does anyone have a configuration example?

or have you successfully established a tunnel between these two devices? or between SSG5 and Cisco ASA 5520?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
ajagadee Mon, 12/15/2008 - 19:47
User Badges:
  • Cisco Employee,

Thomas,


Since, both the devices support the IPSEC RFC, you should be able to build the ipsec tunnel between them.


Below is a URL that has information on Configuring IPSec LAN-to-LAN tunnel between the Cisco Pix Firewall and a NetScreen Firewall. Eventhough, this is for a Pix, it should help you on the Netscreen side. Also, below is another URL between Pix and VPN3000. By comparing both the URLs you should be able to build a tunnel between the VPN3000 and Netscreen.


http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml


LAN-to-LAN IPSec Tunnel Between the Cisco VPN 3000 Concentrator and PIX Firewall Configuration Example


http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml


Regards,

Arul


*Pls rate if it helps*

thomuff Tue, 12/16/2008 - 13:55
User Badges:

We figured it out. Local Network configuration was not matching SSG configuration. Thanks for your reply.

Actions

This Discussion