12-15-2008 04:33 PM - edited 03-11-2019 07:26 AM
I have a Cisco PIX 506e which I would like to log all outbound SMTP traffic down to internal IP address. I have a rogue spammer on my network which I would like to track down. I am not to familar with the CLI and prefer to work with the PDM if possible. I setup a Syslog server, but it seems to be capturing almost too much data and I dont see any SMTP traffic other than from my mail server. Here is my current config
12-15-2008 11:25 PM
if this is your setup then, you will only see packets from your mail server on port 25 in the PIX fw logs, which is not that helpful.
To track down the spammer in your network, you will have to check the logs from your MAIL/SMTP server.
You can also try opensource SPAM filters like spamassassin
12-15-2008 11:29 PM
Well I am thinking someone on my network has a trojan which is spamming. The clients sit on the same LAN as my mail server
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide