12-16-2008 04:51 AM - edited 03-10-2019 04:25 AM
Dear All,
I am novice in the security, excuse me if my question is very basic.
I want to configure IPS on Cisco 2821 router. I do not have any server for storing the logs.
Kindly let me know:
Is it possible to configure IPS on a router 2821?
Is it going to increase the CPU utilisation?
Kindly let me have the command/link to configure IPS on the router.
Thnx,
Ashish
12-16-2008 11:48 PM
Hi Ashish,
You can configure IPS on Cisco 2821.Just load it with an image that supports security features.
Here's a good Q&A guide that may help you.
For configuration, you can refer to http://www.cisco.com/en/US/products/ps6634/products_configuration_example09186a008097dbe8.shtml
The CPU util depends on the number of signatures enabled and the amount/type of traffic the router is handling.
HTH.
--Raj
12-17-2008 03:02 AM
Hi Raj,
I am novice in security, have never used SDM as well.
Would appreciate if you can tell me commands on Cisco IOS to configure IPS on router.
Regards,
Ashish
12-17-2008 03:13 AM
Ashish,
You can refer to http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ips_v5.html
This should help you.
--Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide