ASDM help?

Unanswered Question
Dec 16th, 2008

OK im new to ASA im officially going to training in 4 weeks but would like to get familiar with the unit, we got 2 x 5510 and mars. Now im read everything i think about getting the ASDM up, like go to https://192.168.1.1 well i attempt but i get no response can anyone help me here?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
husycisco Tue, 12/16/2008 - 05:50

Hello Jason,

Unlike IOS Routers, Device Manager image must be uploaded in your firewall. Then make sure following command is issued

"http server enable"


Regards

jmmartina Tue, 12/16/2008 - 06:10

OK so your saying i TFTP it to the device like the following steps?


1) Copy TFTP Flash

2) enter remote ip

3) Source file

4) asdm image flash: (Filename)



Is this right??? or wrong i did this and its not working when i ran the last command i got this "Device Manager image set, but not a valid image file flash:asdm-611.bin"

jmmartina Tue, 12/16/2008 - 06:17

I figured it out, IE had an issue LOL i should of tried telnet 443 first which worked so i tried Firefox worked fine thanks for your help!!!

Actions

This Discussion