12-16-2008 07:15 AM - edited 03-11-2019 07:26 AM
I wanted to remove the "proxy arp" off the outside and DMZs.. would this create issues?
12-16-2008 08:12 AM
It depends on whether or not you have "static" statements in your config. ie.
static (inside,outside) 217.22.12.66 192.168.5.1 netmask 255.255.255.255
this tells the ASA that any traffic received on the outside interface for 217.22.12.66 should be translated to 192.168.5.1 and forwarded to the inside. If you disable proxy-arp on the outside interface then the above would stop working because the ASA can no longer respond for arp's to the public IP address.
Jon
12-16-2008 09:52 AM
ok... so since I'm using static commands I shouldnt have any issue with the outside "proxy arp removal".?
12-16-2008 11:08 AM
Apologies if i didn't explain correctly. If you have any static commands that reference either the outside or dmz interfaces then there will be an issue removing. You can only remove it where the firewall does not have to respond to an arp for that IP address. The interfaces you are concerned with are the second one in the static command ie.
static (inside,outside) ....
removing proxy-arp on the outside would cause problem
static (outside,inside) ....
wouldn't cause a problem removing proxy-arp on outside
Usually the outside interface is the one where you need proxy-arp.
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: