12-17-2008 12:28 AM - edited 03-06-2019 03:00 AM
Hi,
I have just bought a Cisco 2960, for some reason I can't enable SSH, can they do this?
Thanks
12-17-2008 12:49 AM
what is your ios version and type ? you should have security feature in your ios
12-17-2008 01:08 AM
sh ver
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(44)SE3, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Sun 28-Sep-08 21:15 by nachen
Image text-base: 0x00003000, data-base: 0x01000000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)SEE6, RELEASE SOFTWARE (fc1)
CBSO_2960 uptime is 1 week, 1 day, 17 hours, 28 minutes
System returned to ROM by power-on
System image file is "flash:c2960-lanbase-mz.122-44.SE3.bin"
cisco WS-C2960-48TT-L (PowerPC405) processor (revision E0) with 61440K/4088K byt
12-17-2008 01:24 AM
Hi Whiteford,
You cannot enable SSH with lanbase image.
You need to have K9 in feature set for SSH to enable.
HTH..rate if helpful..
12-17-2008 01:30 AM
below image will give you the SSH.
c2960-lanbasek9-mz.122-44.SE2.bin
HTH...rate if helpful...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: