EIGRP summarization

Unanswered Question
Dec 17th, 2008
User Badges:

Hi,


I have got some issue to be solved in the below mentioned EIGRP topology.


Topology: Lan1==>R1==>R2==>R3==>Lan2


R1(ethernet-0)1.129.0.0/10

R1(serial-0)=1.65.0.0/10


R2(serial-0)=1.66.0.0/10

R2(serial-1)=2.0.0.1/8


R3(serial-0)=2.0.0.2/8


I have enable no auto-summarization command in the beggining in all 3 routers and in R1 i have advertised only 1.64.0.0/10 network but, in the R2's routing table along with 1.64.0.0 n/w 1.128.0.0/10(which is ethernet n/w address of R1) could also be seen even without being advertised that 1.128.0.0/10 n/w in R1.


So, plz suggest...

Thank you.

Prado



















  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 12/17/2008 - 04:46
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Prado


Please post configs of all 3 routers.


Jon

Actions

This Discussion