Hi,

I have got some issue to be solved in the below mentioned EIGRP topology.

Topology: Lan1==>R1==>R2==>R3==>Lan2

R1(ethernet-0)1.129.0.0/10

R1(serial-0)=1.65.0.0/10

R2(serial-0)=1.66.0.0/10

R2(serial-1)=2.0.0.1/8

R3(serial-0)=2.0.0.2/8

I have enable no auto-summarization command in the beggining in all 3 routers and in R1 i have advertised only 1.64.0.0/10 network but, in the R2's routing table along with 1.64.0.0 n/w 1.128.0.0/10(which is ethernet n/w address of R1) could also be seen even without being advertised that 1.128.0.0/10 n/w in R1.

So, plz suggest...

Thank you.

Prado