12-17-2008 03:02 AM
Hi,
we have some SFP's connected to our switches (these switches are supported by LMS) but they don't appear in the reports.
I don't see anything about these devices in the supported devices tables.
Is it possible to get them shown in the LMS reports (User Tracking reports, I suppose)? Are they supported?
Many thanks.
Solved! Go to Solution.
12-18-2008 10:01 AM
Getting the serial number for most GBIC and SFP interfaces is not possible in RME as RME will only get the serial number for containers.
12-19-2008 05:44 AM
No. Neither application delves that far into element management. The serial numbers would have to be tracked externally. You could also raise a product enhancement request with your account team to get this functionality in RME.
12-17-2008 08:54 AM
SFP ports, or are you referring to switching modules in ISR routers?
12-18-2008 07:47 AM
Hi,
if we execute "show inventory" on the switches, we obtain this:
NAME: "1", DESCR: "WS-C3750G-12S"
PID: WS-C3750G-12S-S , VID: V06, SN: FCZ1209W059
NAME: "GigabitEthernet1/0/1", DESCR: "10/100/1000BaseTX SFP"
PID: , VID: , SN: MTD610640
NAME: "GigabitEthernet1/0/2", DESCR: "10/100/1000BaseTX SFP"
PID: , VID: , SN: MTD025561
NAME: "GigabitEthernet1/0/3", DESCR: "10/100/1000BaseTX SFP"
PID: , VID: , SN: MTD025608
but we cannot see this information in LMS reports. Is it possible to obtain it?
Thanks.
12-18-2008 10:01 AM
Getting the serial number for most GBIC and SFP interfaces is not possible in RME as RME will only get the serial number for containers.
12-19-2008 02:38 AM
And would it be possible to get them from the Campus Manager User Tracking?
12-19-2008 05:44 AM
No. Neither application delves that far into element management. The serial numbers would have to be tracked externally. You could also raise a product enhancement request with your account team to get this functionality in RME.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: