DFM devices synchronisation with DCR

Unanswered Question
Dec 17th, 2008
User Badges:


I am using DFM ver 3.0.2 and Common Services ver 3.1.1 in LMS 3.0 bundle.

I had deleted all the devices in DCR and than added new device but in DFM devices are not synchronised with newly added DCR devices.

I tried to delete devices from DFM local database by disabling automatic device synchronisation in Auto Import Filter but didn't get any delete button enable.

I also tried to restrat InventoryCollection,TISServer and other related processes but didn't get any success.

DFM is still showing old devices list even though I enable device synchronisation in Auto Import Filter.

Is there any way to delete devices from DFM local databse through CLI.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Wed, 12/17/2008 - 11:20
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

No, but you can try reinitializing the DFM databases, then re-enable DCR auto-sync to see if that corrects the problem. But before that, you really need to upgrade to DFM 3.0.4. The DFM 3.0.4 upgrade is available from Common Services > Software Center > Software Update. This update fixes two critical bugs which could explain the symptoms you're seeing.

Farrukh Haroon Wed, 12/17/2008 - 22:28
User Badges:
  • Red, 2250 points or more

The Delete button will show one you disable the auto-sync. I would also highly recommend the upgrade, fixed some issues for us as well.




This Discussion