12-18-2008 07:24 AM - edited 03-06-2019 03:02 AM
Namely, I want to be able to use the wan IP address for MY Terminal Server, WSUS Server, etc from both My LAN users and WAN users.
I should mention that I am using a Cisco 1811 and SDM Version 2.41
12-18-2008 07:45 AM
If you're wanting someone to come into your network to use your TS, you'll need to configure static nat and map your public IP to a private address on the inside.
HTH,
John
12-18-2008 07:55 AM
I can already hit them all from the outside, and have this set up.
I want to be able to hit my servers on my 192.168.1.*, using their Wan addresses 205.*.*.20 from on the LAN (192.168.1.*).
Something to tell my internal network machines that the wan address given should be redirected to in-house.
12-18-2008 07:59 AM
I'm not sure this will be possible, but I've never had to configure it.
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide