Hello - I am trying to set up (for the first time) a simple DMZ on my PIX 515. Here is the DMZ layout. I have a PIX 515 connected to a 2950 switch that has one server (for now) that I need to have the world access a webpage on. I though I had it set up right, but I can't see it from the outside world, or from my private network behind the PIX. I can see the server from within the PIX. I am attaching my config, and any help would be great. I know I am probably missing a few things. Thanks!
Glad to be of help. Could you update the forum that the solution resolved the issue, so others who run into similar issue can benefit out of the post. Thanks!
If the prod network is on the inside interface:
static (inside,dmz) 192.168.2.8 192.168.2.8
By default, there are not ACLs applied on the inside interface. In case if you have configured one, make sure that you permit the necessary ports/protocols for this server.
*Pls rate all helpful posts*