ISDN Messages

Answered Question
Dec 18th, 2008
User Badges:

Hi Expert's


someone know how to turn off the next ISDN messages from terminal monitor:


VoIP-GW-02# terminal monitor

VoIP-GW-02#

110000: Dec 18 20:24:52.255: %ISDN-6-CONNECT: Interface Serial0/1/1:1 is now connected to 22904270 N/A

110001: Dec 18 20:24:52.879: %ISDN-6-CONNECT: Interface Serial0/1/1:30 is now connected to 22730911 N/A

110002: Dec 18 20:24:55.219: %ISDN-6-DISCONNECT: Interface Serial0/1/1:30 disconnected from 22730911 , call lasted 2 seconds


Correct Answer by Jesse Drohen about 8 years 3 months ago

Hello,


Configure "no logging event link-status" under the interface.


GW01#config t

GW01(config)#interface serial 0/1/1:23

GW01(config-if)#no logging event link-status


hth,

Jesse

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.5 (2 ratings)
Loading.
Nicholas Matthews Thu, 12/18/2008 - 20:24
User Badges:
  • Red, 2250 points or more

I believe this is a aaa command.


I would do a sh run | i aaa


I believe it is aaa gw-accounting or something similar.

abrenes26 Fri, 12/19/2008 - 07:12
User Badges:

Hi nicmatth


This is the result of the sh run| i aaa


VoIP-GW-02#sh run | i aaa

aaa new-model

aaa authentication login LocalDB local

aaa authentication login ACS group radius local

aaa session-id common


Do you see something?


Thanks


Correct Answer
Jesse Drohen Fri, 12/19/2008 - 08:17
User Badges:
  • Cisco Employee,

Hello,


Configure "no logging event link-status" under the interface.


GW01#config t

GW01(config)#interface serial 0/1/1:23

GW01(config-if)#no logging event link-status


hth,

Jesse

Actions

This Discussion