Solved: %QOS Policy-maps configuration is not supported

brock.fisher · ‎12-18-2008

I get this error from a 7201 durring the POST of the router boot. QOS is applied to the WAN interface and I see no other errors in the router.

ajagadee · ‎12-18-2008

Hi,

Are you seeing this message listed above the Boot Messages.

% QOS Policy-maps configuration is not

%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.

If the Messages appear before

"SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader."

They are generated by the boot image when it is parsing the config. This is typically due a features not supported by the boot image.

This should not impact the router after loading the "final" IOS.

Regards,

Arul

*Pls rate all helpful posts*

sachinraja · ‎12-18-2008

has this been working before ? Was there any change or it pop'ed up suddenly ?

Raj

brock.fisher · ‎12-18-2008

This is a New router first time a config has been put in. we have tried different IOS Codes as well. always getting this error though.

ajagadee · ‎12-18-2008

Hi,