3 Sites using 3 UC500

Unanswered Question
Dec 19th, 2008
User Badges:

Hi guys I was wondering if there's a way or it's possible to install 3 different sites on different locations each one with a UC500 16 Users, and share extensions and be able to communicate with other sites, if it is, can you help me with some guidelines and best practices?


Regards


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nicholas Matthews Fri, 12/19/2008 - 09:22
User Badges:
  • Red, 2250 points or more

Yes, you can do this.


What you will end up with is dial peers pointing towards the other sites.


If you have 3 sites, say A has extensions 1.., B has 2.., and C has 3..


You would have dial peers on each site that point those extensions to the other ones via SIP or H323.


Site A:

dial-peer voice X voip

destination-pattern 2..

session target ipv4:


dial-peer voice X voip

destination-pattern 3..

session target ipv4:



Site B:

dial-peer voice X voip

destination-pattern 1..

session target ipv4:


dial-peer voice X voip

destination-pattern 3..

session target ipv4:



...etc


You would in essence, create a fully meshed H323 or SIP trunk between each site.

Actions

This Discussion