card VIC2-4FXO

Answered Question
Dec 20th, 2008

I have VIC2-4FXO card on HWIC3 slot.

I have an anlog line connected on the port 0/3/0 how to forwad this line to a specific extension? Extension 100 per example.

Regards

I have this problem too.
0 votes
Correct Answer by Nicholas Matthews about 7 years 11 months ago

Hi,

This will be with the connection plar command:

voice-port 0/3/0

connection plar 100

hth,

nick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Nicholas Matthews Sat, 12/20/2008 - 05:30

Hi,

This will be with the connection plar command:

voice-port 0/3/0

connection plar 100

hth,

nick

Nicholas Matthews Mon, 12/22/2008 - 09:54

You have to think about it this way - the FXO port on the router is just like a plan analog telephone. When you pick up a normal analog phone, you have information about what the number of that phone is. There isn't any method of information passing to send this information to the phone, nor is there a need to.

Because of this, the gateway will not automatically know where to send the call. This is what the connection plar statement is for, so that it sends it to a specified DN. So in this case, 100 would either be the auto attendant or DN of a user that would take the calls.

hth,

nick

Actions

This Discussion