Jon Marshall Sat, 12/20/2008 - 11:37
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Brent


That is a large subject as it covers a lot of MPLS. Attached is a link to vrf-lite configuration on 4500. Vrf-lite is not full MPLS but it does give you an idea of how VRF's work and how to configure -


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25sg/configuration/guide/vrf.html


Also here is the start page for all things MPLS on Cisco site -


http://www.cisco.com/en/US/tech/tk436/tk428/tsd_technology_support_protocol_home.html


Finally there are a number of design docs that Cisco produce that explain the concepts behind vrf's. One that i have found useful is this one -


http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/PathIsol.html


This should get you started :-)


Jon



bravosierra9 Thu, 01/29/2015 - 06:02
User Badges:

That last link is extremely useful.  I've been on it for the past half hour and have learned a ton.  Thanks.

Actions

This Discussion