12-21-2008 02:43 AM - edited 03-15-2019 03:11 PM
Is it possible to connect two PBXs together with 1721?
The diagram is attached herewith...
Please help
Solved! Go to Solution.
12-23-2008 01:52 PM
12-21-2008 12:44 PM
This is a voice capable router, so you should be able to. Doing hairpin analog calls should be something very manageable.
12-21-2008 09:30 PM
but 1721 is not a voice router...its a data router
http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a00800920ec.html
12-22-2008 05:36 AM
Hi Eldho,
Apologies. The data sheet I was looking at grouped the 1721 with the 1751-V. It didn't sound right, but I wasn't going to argue with a data sheet.
So the correct answer is no - you would need a 1751-V minimum to connect two PBXs together.
hth,
nick
12-23-2008 07:52 AM
I guess the two PBX are at different sites. If so, then you shoud be able to integrate them using two VG or two Voice capable router with analog or digital trunks.
12-23-2008 01:39 PM
That i know....But the question is it to possible with 1721 router???
12-23-2008 01:52 PM
No. You can't do it.
hth,
nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide