create DN in Callmanager 4.1

Answered Question
Dec 21st, 2008

Hi All,

I have not worked a lot with callmanager 4.1. How can I create DN without to create phones? In CUCM, DN can be created without to assign to any phone. can we do the same thing in CM 4.1?

thanks

Alex

I have this problem too.
0 votes
Correct Answer by Jaime Valencia about 7 years 11 months ago

the DN alone creation is not implemented in CCM, only in CUCM. you'll have to create the phones using another MAC address, then delete them and they will go to unassigned DNs. that is the only way

HTH

java

if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
alex goshtaei Sun, 12/21/2008 - 12:55

thanks for reply,

We have 100 DID range, I'd like to create all extensions corresponded to the DID before to assign to any phone then show admin assistant how to add those DN to the phones. like CUCM 6.1

thanks again

Alex

david-lima Sun, 12/21/2008 - 14:30

Hi, you can insert the lines/phones with BAT and create dummy Mac address, then you can choose the DN and change it with the correct MAC Address.

Hope this help.

David.

Correct Answer
Jaime Valencia Sun, 12/21/2008 - 16:25

the DN alone creation is not implemented in CCM, only in CUCM. you'll have to create the phones using another MAC address, then delete them and they will go to unassigned DNs. that is the only way

HTH

java

if this helps, please rate

Actions

This Discussion