Call blocking

Unanswered Question
Dec 22nd, 2008


With this command

dial-peer voice 1 pots

destination-pattern 0

port 0/3/0

forward-digits 1

With this config all extension can take this line by dial the 0.

How to authorize only a range of extension or only a specific extension to take this line?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
hassan_oudeh Mon, 12/22/2008 - 04:00

ok then you need to do COR list configuration,

for example:

you have these two phones:

ephone 1

button 1:1

cor incoming phone1

ephone 2

button 2:2

cor incoming phone2

COR config:


dial-peer cor custom

name phone1

name phone2

dial-peer cor list phone1

member phone1

dial-peer cor list phone2

member phone2

then on that dial-peer

dial-peer voice 10 pots

destination-pattern 0

forward 1

port 0/3/0

cor outgoing phone2 <-- will enable only phone2 to call this number

refer to this link for more inforamtion:

please HTH if usefull


p.maillot Thu, 12/25/2008 - 02:26

Thank, now I can block the "0" for a specific extension or some extension but I want to do that.

I want by dial "0" that the extension 100 can call all number begining by 2xxxxxxx and 3xxxxxxx and I want that the extension 101 can dial only 3xxxxxxx and no 2xxxxxxx numbers.


This Discussion