6500 PFC3B not collecting NetFlow stats for software-routed flows

Unanswered Question

Can anybody explain, should the 6500 collect NetFlow statistics for flows routed in software? The problem is that when I send 1000-packet ping I do see the statistics collected, but when I send the ping with Record Route IP option NetFlow counters are all zero... (The flow _is_ created as a hardware-switched PFC flow...).

The IOS is 12.2(33)SXH2a on Sup720/PFC3b.

Po2 172.16.54.254 Vl1 172.30.1.11 01 0008 0000 1000

Vl1 172.30.1.11 Po2 172.16.54.254 01 0000 0000 1000

Po2 172.16.54.254 Vl1 172.30.1.11 01 0008 0000 0

Vl1 172.30.1.11 Po2 172.16.54.254 01 0000 0000 0

mls aging long 64

mls aging normal 32

ip flow-cache timeout inactive 30

ip flow-cache timeout active 1

mls netflow usage notify 60 120

mls flow ip interface-full

mls netflow interface

mls nde sender version 5

ip flow-export version 5

ip flow-export destination 172.30.1.99 3000

interface Port-channel1

ip address 172.16.0.6 255.255.255.252

ip flow ingress

interface Port-channel2

ip address 172.16.0.14 255.255.255.252

ip flow ingress

interface Vlan1

ip address 172.30.1.101 255.255.255.0

ip flow ingress

arp timeout 300

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion