7925 Wireless Phone and CCM 6.0

Unanswered Question
Dec 22nd, 2008
User Badges:

Looking at the datasheet for the 7925 it seems that the phone is widely supported across many CCM versions.


Does anyone know what version of 6.0 needs to be installed to add a phone in CCMAdmin?


The menu goes from 7921 --> 7931.


Thanks,


Aaron

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Chris Deren Mon, 12/22/2008 - 08:18
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

You should be able to get it to work with the latest device pack.


HTH,


Chris

Rob Huffman Mon, 12/22/2008 - 08:43
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Aaron,


Here is a little additional info to the good tips from Chris (+5 points Chris - Happy Holidays)


Before installing the firmware, use Table 1 below to verify that your Cisco Unified Communications Manager supports the Cisco Unified Wireless IP Phone 7925G. If your Cisco Unified Communications Manager does not support the Cisco Unified Wireless IP Phone 7925G, you will need to upgrade to a Cisco Unified Communications Manager release that supports the phone and/or install a device pack that will add the support for the phone.


Table 1: Cisco Unified Communications Manager Release Requirements for Cisco Unified Wireless IP Phone 7925G Support


CUCM Release

Minimum Service Release (SR) Required

DevicePack Required?

DevicePack Minimum Release

Notes

4.1(1) - 4.1(3)

-

Yes

4.1(82)

Install device pack

4.2(1) - 4.2(3)

-

Yes

4.2(3.55)

Install device pack

4.3(2)

-

Yes

4.3(2.08)

Install device pack

5.1(1) - 5.1(2)

5.1(3)

Yes

5.1.3.4114-2

Upgrade to 5.1(3) and install device pack

5.1(3)

-

Yes

5.1.3.4114-2

Install device pack

6.0(1)

-

Yes

***DevicePack Minimum Release 6.0.1.3112-1

Install device pack

6.1(1)

6.1(2)

Yes

6.1.2.1120-1

Upgrade to 6.1(2) and install device pack

6.1(2)

-

Yes

6.1.2.1120-1

Install device pack

7.0(1)

-

Yes

7.0.1.12004-1

Install device pack


http://www.cisco.com/web/software/282074289/23369/cmterm-7925-sccp.1-3-1-Readme.html



Hope this helps!

Rob

Chris Deren Mon, 12/22/2008 - 08:50
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Happy holidays Rob,


You continue to amaze me with your patience and detailed responses. As always well deserved 5 points for you.


Chris




Rob Huffman Mon, 12/22/2008 - 09:45
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hey Chris,


Thanks so much for your kind words my friend! They mean alot coming from a fellow NetPro whom I really admire.


Have a Rockin Festive Season.


Cheers!

Rob

acjarvis Mon, 12/22/2008 - 10:04
User Badges:

Rob-


Thanks for your reply. When checking the software download site the latest version I see under


CUCM V 6 --> Device Packages is


6.0(1.3109)


Maybe its not released yet?


Aaron

acjarvis Mon, 12/22/2008 - 10:50
User Badges:

The same thing applies to 6.1.2


Latest device pack for 6.1.2 is


6.1(2.1113)



7.0 doesn't have the listing for device packs as of yet.


Perhaps they will be released soon....considering the phones are shipping??

Rob Huffman Mon, 12/22/2008 - 11:20
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Aaron,


Good call! I'm sure these Devpaks are right around the corner.


I would open a TAC Case and see if they can't setup a special file access for you if you need it ahead of time.


Hope this helps!

Rob

Actions

This Discussion